KRS-E08 HR3: 3 points control

 KRS-E08 HR3

The threshold gate switches units, pumps, fans, burners, etc. As soon as the input voltage reaches the switching threshold, the relay is activated. When the input voltage falls below the switch-off threshold, the relay is released again. The module is designed for a two-level control by means of an analog 0 to 10 V DC control signal.

Tecnical Features

Control signal 0 V DC = Level 1 active
Control signal 5 V DC = No level is active (OFF)
Control signal 10 V DC = Level 2 active
With manual control level
Connection with screw-type terminals

Operating voltage  24 V AC/DC
Current consumption 24 V AC  100 mA
Current consumption 24 V DC  35 mA
Output / voltage  250 V AC
Output / contact  1 changeover contact with 0 position
Output / contact material  Output / continuous current  4 A
Output / switching frequency  1200 cycles/h
Mechanical endurance  1 x 10 7
Electrical endurance 1 x 10 5
Display Yellow and red LED
Dimensions (W x H x D)  22,5 x 61,3 x 60 mm
Weight 70 g
Operating temperature range -10 °C bis +50 °C
Storage temperature range  -25 °C bis +70 °C
Ingress protection for housing / terminal block IP40 / IP20