Italiano
English
MR-SI4 Modbus module with 4 S0 inputs
SKU: MR-SI4 MODBUS RTU
GTIN: 4250184161035
MPN: 11083913
Be the first to write review
174,00 €
MR-SI4 MODBUS RTU - Modbus module with 4 S0 inputs
MR-SI4 MODBUS RTU
The Modbus module with 4 S0 inputs to DIN EN 62053-31 class A was developed for decentralized switching tasks. It is suitable for counting S0 counter pulses. This allows very good integration of the module into an energy controlling system. In case of a power failure, the last counter readings are saved. The inputs can be scanned by means of standard registers via a Modbus master. Module address, bit rate and parity are set with two rotary switches on the front or by software. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.
Technical Features
| Protocol | Modbus RTU |
| Address range | 00 to 99 |
| Bus interface | RS485 (two-wire bus) |
| Transmission rate | 1200 to 115200 bit/s |
| Operating voltage | 24 VAC/DC ± 10% |
| Current consumption | 170 mA (AC) / 65 mA (DC) |
| Relative duty cycle | 100 % |
| Inputs | 4 x S0, class A |
| Display | Green, red and yellow LED |
| Dimensions (L x A x P) | 35 x 69.3 x 60 mm |
| Weight | 83 g |
| Operating temperature range | -5 °C to +55 °C |
| Storage temperature range | -20 °C to +70 °C |
| Ingress protection for housing / terminal blocks | IP40 / IP20 |
Related Products
MR-LD6 LEAKAGE AND LEVEL MONITOR 
MR-DO4 Modbus RTU module with 4 digital outputs
MR-AO4 Modbus RTU 4 analog output
MR-GW MR-GW Modbus RTU / Modbus TCP Gateway
MR-SI4 Modbus module with 4 S0 inputs
MB-DIO2/1-IP Modbus/BACnet 230 V
Related Categories
MODBUS