Router Teltonika RUTX09 LTE, Dual-SIM, 4 Gigabit Ethernet ports, IO, GPS

GTIN: 4779027312460
Be the first to write review
269,00 €

RUTX09: New router LTE, Dual-SIM, 4 Gigabit Ethernet ports, IO, GPS

This powerful LTE router is designed as a Main/Backup Internet source where steady connection and high data throughput is required. Equipped with Dual-SIM and 4 x Gigabit Ethernet ports. RUTX09 has all advanced RutOS software and security features.


• Mobile module 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
• SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
• Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received
• Bridge Direct connection (bridge) between mobile ISP and device on LAN
• SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
• Black/White list Operator black/white list
• Multiple PDN Possibility to use different PDNs for multiple network access and services
• Band management Band lock, Used band status display


• WAN 1 x WAN (can be configured to LAN) 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
• LAN 3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover


• Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)
• Network protocols TCP, UDP, IPv4, IPv6, ICMP, UDP, NTP, DNS, HTTP, FTP, SMTP, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP
• VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
• Connection monitoring Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
• Firewall Port forward, traffic rules, custom rules
• DHCP Static and dynamic IP allocation, DHCP Relayd
• QoS Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
• DDNS Supported >25 service providers, others can be configured manually
• Network backup VRRP, Mobile and Wired WAN options, each of which can be used as backup, using automatic Failover
• Load balancing Balance your internet traffic over multiple WAN connections
• SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)


• WEB UI HTTP, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
• FOTA Firmware update from server, automatic notification.
• SSH SSH (v1, v2)
• SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
• TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems
• SNMP SNMP (v1, v2, v3), SNMP trap
• JSON-RPC Management API over HTTP
• MODBUS MODBUS TCP status/control
• RMS Teltonika Remote Management System (RMS)


• CPU Quad-core ARM Cortex A7, 717MHz
• RAM 256MB, DDR2
• FLASH memory 256MB SPI Flash


• WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
• FOTA Update FW/configuration from server
• RMS Update FW/configuration for multiple devices
• Keep settings Update FW without losing current configuration


• Operating system RutOS (OpenWrt based Linux OS)
• Supported languages Busybox shell, Lua, C, C++
• Development tools SDK package with built environment provided


• GNSS GPS, GLONASS, BeiDou, Galileo and QZSS
• Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS
• NMEA NMEA 0183
• Server software supported server software TAVL, RMS
• Mobile Network Geolocation Location without using GPS, get approximate location based on mobile tower on RMS
• Geofencing Configurable multiple geofence zones


• Input 1 x Digital Input (Non-isolated, Logic low 0...+5V, Logic high +8...+40V)
• Output 1 x Digital Output (open collector type, 30V@0.3A)
• Events SMS, EMAIL, RMS


• Data rate USB 2.0
• Applications Samba share, custom scripts
• External devices Possibility to connect external HDD, flash drive, additional modem, printer
• Storage formats FAT, FAT32, NTFS


• Connector 4 pin industrial DC power socket
• Input voltage range 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
• PoE (passive) Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af and 802.3at standards
• Power consumption 11W Max.


• Ethernet 4 x RJ45 ports, 10/100/1000 Mbps
• Status LEDs 3 x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 3x WAN status LEDs, 1x Power LED
• SIM 2 x SIM slots (Mini SIM - 2FF), 1.8V/3V
• Power 4 pin industrial DC power socket
• Antennas 2 x SMA for LTE, 1 x SMA for GNNS
• USB USB A socket for external devices
• Reset Reset/restore to default button


• Casing material Full aluminium housing
• Dimensions 115 mm x 95 mm x 44 mm (H x W x D)
• Weight 456g
• Mounting options DIN rail (can be mounted on two sides), flat surface placement


• Operating temperature -40 °C to 75 °C
• Operating humidity 10% to 90% non-condensing
• Ingress Protection Rating IP30


There are yet no reviews for this product.
In order to write a review, you must first login.
  • Prices shown are already without VAT.