RUTXR1 Router Enterprise LTE Cat 6

SKU: RUTXR1000000
GTIN: 4779027312613
MPN: RUTXR1000000
Be the first to write review
366,00 €

RUTXR1 Enterprise Router with SFP / LTE interface Rack-mounted

RUTXR1 is our first-ever rack-mounted LTE Cat6 router with redundant power supplies and WAN interfaces, which can be conveniently placed in a server cabinet. It is equipped with dual SIM, USB, and Wave-2 802.11ac Dual Band WIFI. But what makes this product stand out from the rest of Teltonika Networks products are the SFP WAN and dedicated console ports. The unique feature set of this product allows using it as a primary product in a small or home office with LTE backup capabilities, powerful WiFi, and no need for an additional SFP to Ethernet converter.

This feature-rich device is powered by RutOS and is a perfect choice, where a speedy and ultra-reliable connection is required!


  • Mobile module 4G (LTE) – Cat 6 up to 300 Mbps, 3G – up to 42 Mbps
  • SIM switch 2 SIM cards, auto switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection (planned)
  • Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received
  • SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto replay, scheduled SMS (planned), SMPP (planned)
  • USSD Supports sending and reading Unstructured Supplementary Service Data messages
  • Black/White list (planned) Operator black/white list
  • Multiple PDN Possibility to use different PDNs for multiple network access and services
  • Band management Band lock, Used band status display
  • ETHERNET: WAN 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover, Fiber 1 x SFP port (cannot work simultaneously with Ethernet WAN port). LAN 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
  • Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
  • Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake on LAN (WOL), DLNA
  • VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall Port forwards, traffic rules, custom rules
  • DHCP Static and dynamic IP allocation, DHCP Relay, Relayd
  • QoS Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  • DDNS Supported >25 service providers, others can be configured manually
  • Network backup VRRP, Mobile, Wired, Fiber and WiFi WAN options, each of which can be used as an automatic Failover
  • Load balancing Balance Internet traffic over multiple WAN connections
  • SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)
  • Authentication Pre-shared key, digital certificates, X.509 certificates
  • Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
  • Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN Port and tag based VLAN separation
  • Mobile quota control Custom data limits for both SIM cards
  • WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
  • Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter
  • OpenVPN Multiple clients and a server can run simultaneously, 12 encryption methods
  • IPsec IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
  • GRE GRE tunnel
  • PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3 support
  • Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN Method of building scalable IPsec VPNs
  • SSTP SSTP client instance support
  • Zerotier Zerotier VPN client support
  • MODBUS, MODBUS TCP SLAVE ID filtering Respond to one ID in range [1;255] or any
  • Allow remote access Allow access through WAN
  • Custom registers Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
  • MODBUS TCP MASTER Supported functions 01, 02, 03, 04, 05, 06, 15, 16. Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), 
  • MODBUS RTU MASTER (RS232) (PLANNED) Supported baud rates From 300 to 115200, Supported functions 01, 02, 03, 04, 05 (only for alarms), 06 (only for alarms), 15 (only for alarms), 16 (only for alarms), Number of data bits From 5 to 8, Number of stop bits 1 or 2, Parity None, Even, Odd, Flow None, RTS/CTS, Xon/Xoff
  • MQTT GATEWAY: Gateway Allows sending commands and receiving data from Modbus Master trough MQTT broker
  • DATA TO SERVER: Protocols HTTP(S), MQTT, Azure MQTT, Kinesis
  • MONITORING & MANAGEMENT: WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log; FOTA Firmware update from server, automatic notification
    SSH SSH (v1, v2); SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET; Call Reboot, Status, Mobile data on/off, Output on/off; TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
  • MQTT MQTT Broker, MQTT publisher
  • SNMP SNMP (v1, v2, v3), SNMP Trap
  • JSON-RPC Management API over HTTP/HTTPS
  • Modbus Modbus TCP status/control
  • RMS Teltonika Remote Management Systems (RMS)
  • IoT PLATFORMS: Clouds of things Allows monitoring of: Device data, Mobile data, Network info, Availability; ThingWorx Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type; Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
    Azure IoT Hub Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
  • FIRMWARE CUSTOMIZATION: Operating system RutOS (OpenWrt based Linux OS), Supported languages Busybox shell, Lua, C, C++, Development tools SDK package with build environment provided
  • POWER: Connector 2 x 4 pin industrial DC power sockets for main and redundancy power sources, Input voltage range 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection, Power consumption idle: <3W, max: 18W
  • PHYSICAL INTERFACES: Ethernet 5 x RJ45 ports, 10/100/1000 Mbps, Console 1 x RJ45, RS232 communication, Fiber 1 x SFP port
  • Status LEDs 2 x WAN type, 2 x Mobile connection type, 3 x Mobile signal strength, 2 x active SIM, 10 x Ethernet status, 2 x Console status, 2 x Power
  • SIM 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
  • Power 2 x 4 pin DC connector
  • Antennas 2 x SMA for LTE, 2 x RP-SMA for WiFi
  • USB USB A port for external devices
  • Reset Reboot/User default reset/Factory reset button
  • Other Grounding screw, lock
  • PHYSICAL SPECIFICATION: Casing material Full steel housing, Dimensions (W x H x D) 272 x 42.6 x 122.6 mm, Weight 1050 g, Mounting options Rack mounting, flat surface placement
  • Operating temperature -40°C to +70°C, Operating humidity 10 % to 90 % non-condensing



There are yet no reviews for this product.
In order to write a review, you must first login.
  • Prices shown are already without VAT.