QE-CURRENT-485 Current Converter / CURRENT ANALYZER

Qeed's QE-Current-485 is a Modbus current and voltage analyser that can convert most outputs from current or AC current and voltage sensors such as current transformers, voltage transformers, Rogowski probes and Hall effect sensors into a Modbus RTU signal. The QE-Current-485 can also accept inputs from RTD and NTC temperature sensors.
The QE-Current-485 provides registers for the following values I RMS, I AC, I DC also maximum, minimum, average, frequency, crest factor, temperature and resistance. A 0-10V and 4-20mA output and an alarm contact output are also available. Settings are fully configurable with the free software that can be connected to the USB connection on the front of the QE-Current-485.
The Modbus current and voltage analyser is DIN-rail mounted and the power supply and Modbus network can be connected via an optional T-BUS connector.

Technical features 

• Input:Rogowski probes,Current transformer 1 Amp 5 Amp,Current transformer +/- 1 Vpk +/- 10 Vpk,Current transformer 333mV 100 mA ac/dc
• Voltage transformer +/- 1 Vpk +/- 10 Vpk,Hall effect sensor with +/-15 VDC power supply,Temperature RTD 2-wire RTD 3-wire,Temperature NTC 10 kohm NTC 100 kohm
• Modbus RTU digital output SSR output 50 mA 30 Vdc
• Analogue output 4-20 mA 0-10 Vdc
• Power supply 10 to 30 Vdc
• Current consumption Modbus output 35 mA Voltage output 25 mA
• Nominal Operating Temperature 5°F +149°F - 15°C +65°C Storage Temperature - 40°F +185°F - 40°C +85°C
• Humidity (non-condensing) 0-90%.
• Housing material self-extinguishing
• Dimensions 3.6" x 2.7" x 0.7" 93 x 68.3 x 17.7 mm
• Weight 2 oz 55 g
• EMC immunity: EN 61000-6-2. Emission: EN 61000-6-4.
• Configuration Configurable DIP switch